DRY GEAR MODELS
PS Model
Depending on which size you get it holds different sets of gears, gloves and boots. It is a complete drying system for your fire department. All models are available in mobile options with heavy-duty casters. Available in the following sizes and models:
- PS-2
- PS-4
- PS-4/C1
- PS-5
- PS-4/R8
WS Model
WS is our most popular model of dryer where space is at a premium in your station. Depending on which size you get, it holds different sets of gear gloves and boots. This model is wall-mounted. Wet gear not properly dried creates thermal instability in your turnout creating more bacteria. It is available in:
- WS-2
- WS-4
- WS-5
PC Model
The PC model is NFPA compliant in drying of all levels of HAZMAT suits, water rescue suits and ice rescue suits. Suits are dried upside down in as little as 2 hours with warmed air blown directly into the feet and hands. Available in following sizes and models:
- PC-2
- PC-4
- PC-5
Highlights About Our Models
- Operates on 110 volts and plugs into standard outlets, no special wiring needed
- They are portable and on high quality non-marring casters
- All models are fabricated of 16 gage steel for a lifetime of service
- The air management has two systems: ambient and gently warmed
- Gently warmed mode raises the air temperatures by 10 degrees
- Never exceeds 105 degrees in compliance with NFPA 1851
- Each product has a 5 year factory warranty on frame and 2 years on electrical components
- There is an optional 10 year extended non prorated warranty available that could start from the first day of operation if purchased optionally
- An optional antimicrobial powder coat finish is available to help control mold and bacteria
- All of our dryers are extremely quiet. You can carry on a normal conversation while the dryer is running unlike some of our competitors
- Dry Gear Solutions products are made in North America (Canada)
The PS4/R8 incorporates a complete PPE drying system for your fire department. It dries 4 sets of turnout gear and 8 SCBA face pieces and/or helmets in any combination.
The PS4/R8 operates on 110 volts drawing only 12 amps of electricity. A very compact unit at 63” long by 21” wide and 87” high the dryer fits almost anywhere in your station. The added mobility of the casters allows for storage and ease of movement.
The PS4/R8 operates on 110 volts drawing only 12 amps of electricity. A very compact unit at 63” long by 21” wide and 87” high the dryer fits almost anywhere in your station. The added mobility of the casters allows for storage and ease of movement.
Holds 4 sets of gear, gloves and boots. Our most popular model of dryer where space is at a premium in your station. Wet gear not properly dried creates thermal instability in your turnouts and creates the ideal bacteria haven with sweat, blood, dirt, and other substances for bacteria to thrive.
2, 4, and 5 set models available in mobile option with heavy-duty casters or traditional wall mounted.
2, 4, and 5 set models available in mobile option with heavy-duty casters or traditional wall mounted.
Simultaneously dries four pairs of Boots, Gloves, Facepieces, Hoods, Fits helmets nicely, Portable or wall-mounted options.
Palm expanders keep glove fingers straight, allowing air to penetrate and aiding the drying process. (also available in 9PX, 18 and 18PX)
Holds 16 SCBA face pieces or helmets. Mobile or wall mounted SCBA mask dryer. Warmed air is blown into the face piece and onto the webbing. Reduces harmful bacteria and removes foul odors. Dry your SCBA face masks safely, in a fraction of the time of hang drying. Models available for 8 SCBA face pieces/ Helmets as well.
The EOD-AM model dryer was developed and researched to use cleaning nanotechnology, making it the only recommended method of cleaning and drying for this type of PPE gear. Any other form of drying and cleaning may compromise the suit’s designed integrity, thusly reducing its serviceable lifespan and potentially endangering the wearer.
Dries four sets of turnout gear & one water rescue suit or a hazmat suit, Fully mobile, Space saving, Customizable.
PC2 holds 2 one piece rescue suits. NFPA compliant drying of all levels of HAZMAT suits, water rescue suits and ice rescue suits. Suits are dried upside down in as little as 2 hours with warmed air blown directly into the feet and hands. Available in 2, 4, and 5 suit models.
Holds 6 pairs of boots and gloves. NFPA 1851 recommends ambient air drying of boots, gloves, and other firefighting gear. Drying from the toe of the boot back is the best method of drying. Palm expanders allow for quicker drying of gloves to extend the life of the gloves. Available in 6 or 8 pair models.
Holds 12 firefighter helmets, flight helmets or other specialized headgear. NFPA 1851 recommends washing and air drying of the helmet liner to prevent bacteria and mildew that causes disease.
Safely & Completely Dries Drink Tube Circuit Components, Includes Adapter for NATO Style Canteen Cap Attachment, Helps Eliminate Disease Causing Pathogens in the Mask & Drink (Also available MRP12 which is portable)
Portable 4 pair glove, 4 pair boot, and 8 SCBA face piece, helmet, or hood PPE gear Dryer.
This dryer was designed to make make up for the lack of PPE drying capability of most fire stations current extractors that typically can only handle the over coat and bunkers.
This dryer was designed to make make up for the lack of PPE drying capability of most fire stations current extractors that typically can only handle the over coat and bunkers.